Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd
Professional, Sophisticated and Innovative
Add to Cart
Wireline Multi -Parameter Geophysical Well Logging For Water Well Survey
How to use geophysical well logging tool?
1. The instrument should be placed in the open space in the field. The space should be flat and dry land. It is about 10 meters from the winch to the well.
2. The pulley should be firmly fixed on the frame before setting on the well, so as not to loose the frame into the well. Then, connect 4 lines on the logger box, which is the power cord, USB line, depth encoder line, and collector ring line.
3. Note: geophysical well logging tool use 220V power supply, please use Multimeter to measure and check before connecting, so as not to be mistaken for burning the instrument.
Technical Specification of host
| Instrument Power Supply | DC200V±20%,Electricity≤40mA |
| Electrode Array | AM 16”;AM 64” |
| Natural Gamma Sensor | NaI Crystal |
| Temperature Sensor | Platinum Resistance (pt100) |
| Measuring Range | |
| resistivity | 1~4000Ωm(customize10000Ωm) |
| Spontaneous Potential (SP) | ±1200mV |
| Natural Gamma | 0~32768cps |
| Temperature Range | 0℃~100℃, Resolution:0.025℃ |
| Measurement Accuracy | 2%(10~4000Ωm)or ±1Ωm |
| Environmental | Temperature<80℃;Pressure<20MPa |
| Signal | Bipolar Codes |
How to use geophysical well logging winch?
1. Check if there are any loosing and damaged parts before use
2. Check whether the wires are reliable.
3. Make sure that electric motor is good to ground.
4. Please note that the measuring cable is a 1-core wire cable with a force of 300kg and a resistance of less than 20 ohms per 100 meters.
4. Cable winch can be electric or manual. In the case of an unexpected power failure in the work, the instrument will be upgraded by hand, and the active gear and the reducer should be removed by the left arm.
Technical Specification of winch
| Speed range | 0~30 meter/minute |
| Depth range | 0~1000 meters |
| Controlling mode | Used together with JCK-1 Automatic Winch Controller |
| Working temperature | -10~70 °C |
| Power supply | AC 220V±10%, 50 Hz |
| Motor power | 1100 W |
| Net weight | 110 kg (without cable) |
| Size | 700 mm×550 mm×700 mm (Length ×Width ×Height) |
Product Display
About Us